ATP: the cell's energy carrier

Grade 9 Science Worksheet - Challenge Me

NameDate

Circle the best answer.

  1. Flow diagram (model, not to scale), drawn inside the cell membrane. Ari reads that one ATP's hydrolysis releases 7.3 kcal/mol and moving one sodium ion across a membrane takes 2.1 kcal/mol. How many whole sodium ions could that energy move?

    • 1 ion: each ATP is meant to move a single sodium ion
    • 4 ions: 7.3 ÷ 2.1 = 3.5, and half an ion is rounded up to 4
    • 9 ions: 7.3 + 2.1 = 9.4, and that is rounded down to 9
    • 3 ions: 3 × 2.1 = 6.3 fits in 7.3, but 4 × 2.1 = 8.4 does not
  2. Read this first

    Use this

    Flow diagram (model, not to scale), drawn inside the cell. Inputs in boxes on the left: ATP; model reaction X. Outputs in boxes on the right: ADP and Pi; model reaction X done. A wavy arrow points out of the reaction: 14 kcal/mol released by ATP hydrolysis in a living cell. Each run of model reaction X needs 5 kcal/mol.

  3. Bo reads that ATP hydrolysis in a living cell releases 14 kcal/mol. A model reaction X needs 5 kcal/mol each time. How many whole runs of X can one ATP drive?

    • 9 runs: 14 − 5 = 9, and each run uses up one unit of 5
    • 2 runs: 2 × 5 = 10 fits in 14, but 3 × 5 = 15 is too much
    • 0 runs: ATP releases energy, so it cannot drive anything
    • 3 runs: 14 ÷ 5 = 2.8, and the 0.8 is counted as a whole run
  4. This is the first step of glycolysis. In the first step of glycolysis, a cell spends ATP to add a phosphate group to glucose. Esme asks why. What is the best reason?

    • ATP stores the glucose until the cell needs it later on
    • The ATP is used up for good once it gives away its phosphate
    • Adding a phosphate to glucose needs energy, and ATP hydrolysis supplies it
    • Adding a phosphate to glucose releases energy, so ATP is a spare
  5. Jun reads a model graph. At time 0 a cell stops rebuilding ATP while it keeps working. When does the ATP run out, and what does that show?

    • At 3 s: ATP is a short-term supply that must be rebuilt
    • At no point: ADP and Pi turn back into ATP on their own
    • At 30 s: ATP is the cell's long-term store of energy
    • At 3 s: the ATP is gone for good, so the cell cannot recover
  6. ATP budget of a model cell (model data)

    measureATP molecules
    present at the start40
    broken down each second8
    rebuilt each second5
  7. Kira reads a model ATP budget. The cell works for 4 seconds at these rates. How many ATP molecules are present at the end?

    • 8: 4 seconds × 8 broken down leaves 8, with nothing rebuilt
    • 52: each second 8 − 5 = 3 is gained, so 40 + 12 = 52
    • 60: 4 seconds × 5 rebuilt adds 20 to the 40, with nothing broken down
    • 28: each second 8 are broken down and 5 rebuilt, a net loss of 3
  8. Use this

    Flow diagram (model, not to scale), drawn inside the cell. Inputs in boxes on the left: glucose, amount not shown. Outputs in boxes on the right: energy extracted: 17 energy units (model data); energy released as heat: the rest. No wavy arrow label is drawn. OpenStax: glucose pathways extract about 34 percent of the energy in glucose.

  9. Luz reads that glucose-breakdown pathways extract about 34 percent of the energy in glucose and release the rest as heat. A model cell extracts 17 energy units. About how many units did the glucose hold?

    • About 17, because the cell extracts the full amount
    • About 50, because 17 is about 34 percent of 50
    • About 6, because 34 percent of 17 is about 6
    • About 83, because 17 plus the 66 percent lost is 83
  10. Use this

    Flow diagram (model, not to scale), drawn inside the cell. Inputs in boxes on the left: line 1: ATP and water. Outputs in boxes on the right: line 2: ADP, with 2 phosphate groups, and Pi; line 3: ADP and Pi leave the cell as waste; line 4: glucose breakdown later supplies energy to rebuild. A wavy arrow points out of the reaction: line 1: energy released.

  11. Milo's notebook describes what happens to ATP in a cell, in four lines. Which line has a flaw?

    • Line 4: rebuilding ATP needs no energy, so line 4 is extra
    • Line 3: ADP and Pi are rebuilt into ATP, not thrown away
    • Line 2: ADP should have 3 phosphate groups, like ATP
    • Line 1: ATP should hold its energy for weeks, not release it
  12. ATP in a working model cell (model data)

    time (s)ATP presentATP broken down each secondATP rebuilt each second
    0601212
    10601212
    20601212
  13. Pia says the amount of ATP stayed at 60, so the cell used none. What is the flaw in that claim?

    • The amount should rise, because using ATP makes more of it
    • A steady amount can mean ATP is rebuilt as fast as it is used
    • The amount should fall, because used ATP is gone for good
    • A steady amount shows the ATP was stored away in the cell, not used
  14. Use this

    Flow diagram (model, not to scale), drawn inside the cell. No wavy arrow label is drawn. No wavy arrow labels are drawn.

  15. Tala's friend says rebuilding ATP is what releases the energy a cell uses for work. Which reply is correct?

    • Agree: joining the third phosphate to ADP releases energy
    • Disagree: rebuilding releases energy, and breaking takes it in
    • Disagree: rebuilding takes energy in; breaking ATP down releases it
    • Agree: ADP and Pi make the energy by themselves
  16. ATP made during glucose breakdown (real data, from OpenStax Biology 2e)

    processshare of the ATPwhere it happens
    chemiosmosis90 percentmitochondria in a eukaryotic cell
    substrate-level phosphorylationa few ATP moleculessteps of the glucose pathways
  17. Zee reads that the mitochondria in a model muscle cell stop working. Which prediction fits the card?

    • ATP rebuilding stays the same, since stored ATP lasts for months
    • ATP rebuilding stays the same, since ADP and Pi make energy alone
    • ATP rebuilding stops at once, since the ATP is used up for good
    • ATP rebuilding falls sharply, since 90 percent of the ATP from glucose is made in mitochondria
PencilGopencilgo.com

ATP: the cell's energy carrier

Answer Key - Grade 9 Science Worksheet - Challenge Me

Circle the best answer.

  1. Flow diagram (model, not to scale), drawn inside the cell membrane. Ari reads that one ATP's hydrolysis releases 7.3 kcal/mol and moving one sodium ion across a membrane takes 2.1 kcal/mol. How many whole sodium ions could that energy move?

    • 1 ion: each ATP is meant to move a single sodium ion
    • 4 ions: 7.3 ÷ 2.1 = 3.5, and half an ion is rounded up to 4
    • 9 ions: 7.3 + 2.1 = 9.4, and that is rounded down to 9
    • 3 ions: 3 × 2.1 = 6.3 fits in 7.3, but 4 × 2.1 = 8.4 does not
  2. Read this first

    Use this

    Flow diagram (model, not to scale), drawn inside the cell. Inputs in boxes on the left: ATP; model reaction X. Outputs in boxes on the right: ADP and Pi; model reaction X done. A wavy arrow points out of the reaction: 14 kcal/mol released by ATP hydrolysis in a living cell. Each run of model reaction X needs 5 kcal/mol.

  3. Bo reads that ATP hydrolysis in a living cell releases 14 kcal/mol. A model reaction X needs 5 kcal/mol each time. How many whole runs of X can one ATP drive?

    • 9 runs: 14 − 5 = 9, and each run uses up one unit of 5
    • 2 runs: 2 × 5 = 10 fits in 14, but 3 × 5 = 15 is too much
    • 0 runs: ATP releases energy, so it cannot drive anything
    • 3 runs: 14 ÷ 5 = 2.8, and the 0.8 is counted as a whole run
  4. This is the first step of glycolysis. In the first step of glycolysis, a cell spends ATP to add a phosphate group to glucose. Esme asks why. What is the best reason?

    • ATP stores the glucose until the cell needs it later on
    • The ATP is used up for good once it gives away its phosphate
    • Adding a phosphate to glucose needs energy, and ATP hydrolysis supplies it
    • Adding a phosphate to glucose releases energy, so ATP is a spare
  5. Jun reads a model graph. At time 0 a cell stops rebuilding ATP while it keeps working. When does the ATP run out, and what does that show?

    • At 3 s: ATP is a short-term supply that must be rebuilt
    • At no point: ADP and Pi turn back into ATP on their own
    • At 30 s: ATP is the cell's long-term store of energy
    • At 3 s: the ATP is gone for good, so the cell cannot recover
  6. ATP budget of a model cell (model data)

    measureATP molecules
    present at the start40
    broken down each second8
    rebuilt each second5
  7. Kira reads a model ATP budget. The cell works for 4 seconds at these rates. How many ATP molecules are present at the end?

    • 8: 4 seconds × 8 broken down leaves 8, with nothing rebuilt
    • 52: each second 8 − 5 = 3 is gained, so 40 + 12 = 52
    • 60: 4 seconds × 5 rebuilt adds 20 to the 40, with nothing broken down
    • 28: each second 8 are broken down and 5 rebuilt, a net loss of 3
  8. Use this

    Flow diagram (model, not to scale), drawn inside the cell. Inputs in boxes on the left: glucose, amount not shown. Outputs in boxes on the right: energy extracted: 17 energy units (model data); energy released as heat: the rest. No wavy arrow label is drawn. OpenStax: glucose pathways extract about 34 percent of the energy in glucose.

  9. Luz reads that glucose-breakdown pathways extract about 34 percent of the energy in glucose and release the rest as heat. A model cell extracts 17 energy units. About how many units did the glucose hold?

    • About 17, because the cell extracts the full amount
    • About 50, because 17 is about 34 percent of 50
    • About 6, because 34 percent of 17 is about 6
    • About 83, because 17 plus the 66 percent lost is 83
  10. Use this

    Flow diagram (model, not to scale), drawn inside the cell. Inputs in boxes on the left: line 1: ATP and water. Outputs in boxes on the right: line 2: ADP, with 2 phosphate groups, and Pi; line 3: ADP and Pi leave the cell as waste; line 4: glucose breakdown later supplies energy to rebuild. A wavy arrow points out of the reaction: line 1: energy released.

  11. Milo's notebook describes what happens to ATP in a cell, in four lines. Which line has a flaw?

    • Line 4: rebuilding ATP needs no energy, so line 4 is extra
    • Line 3: ADP and Pi are rebuilt into ATP, not thrown away
    • Line 2: ADP should have 3 phosphate groups, like ATP
    • Line 1: ATP should hold its energy for weeks, not release it
  12. ATP in a working model cell (model data)

    time (s)ATP presentATP broken down each secondATP rebuilt each second
    0601212
    10601212
    20601212
  13. Pia says the amount of ATP stayed at 60, so the cell used none. What is the flaw in that claim?

    • The amount should rise, because using ATP makes more of it
    • A steady amount can mean ATP is rebuilt as fast as it is used
    • The amount should fall, because used ATP is gone for good
    • A steady amount shows the ATP was stored away in the cell, not used
  14. Use this

    Flow diagram (model, not to scale), drawn inside the cell. No wavy arrow label is drawn. No wavy arrow labels are drawn.

  15. Tala's friend says rebuilding ATP is what releases the energy a cell uses for work. Which reply is correct?

    • Agree: joining the third phosphate to ADP releases energy
    • Disagree: rebuilding releases energy, and breaking takes it in
    • Disagree: rebuilding takes energy in; breaking ATP down releases it
    • Agree: ADP and Pi make the energy by themselves
  16. ATP made during glucose breakdown (real data, from OpenStax Biology 2e)

    processshare of the ATPwhere it happens
    chemiosmosis90 percentmitochondria in a eukaryotic cell
    substrate-level phosphorylationa few ATP moleculessteps of the glucose pathways
  17. Zee reads that the mitochondria in a model muscle cell stop working. Which prediction fits the card?

    • ATP rebuilding stays the same, since stored ATP lasts for months
    • ATP rebuilding stays the same, since ADP and Pi make energy alone
    • ATP rebuilding stops at once, since the ATP is used up for good
    • ATP rebuilding falls sharply, since 90 percent of the ATP from glucose is made in mitochondria