Lab tools, hazard symbols and Safety Data Sheets

Grade 10 Science Worksheet - Building Confidence

NameDate

Circle the best answer, or write your answer on the line.

  1. Ari reads 5 mL on a cylinder whose readings are good to ±0.5 mL. What percent of the reading is that uncertainty?

  2. Bo reads 8 mL on a cylinder whose readings are good to ±0.1 mL. What percent of the reading is that uncertainty?

  3. Esme reads 25 mL on a cylinder whose readings are good to ±1 mL. What percent of the reading is that uncertainty?

  4. Read this first

    Measuring tools (example set)

    toolholdssmallest mark
    10 mL cylinder10 mL0.2 mL
    100 mL cylinder100 mL1 mL
    250 mL cylinder250 mL2 mL
    250 mL beaker250 mL25 mL
  5. Jun needs 8.4 mL of water. Which tool gives the most precise reading?

    • The 250 mL beaker, since its wide opening makes pouring easy
    • The 10 mL cylinder, whose 0.2 mL marks are the finest that can hold 8.4 mL
    • The 100 mL cylinder, since it holds far more than 8.4 mL
  6. A 4.0 mL sample is read on a 100 mL cylinder (±0.5 mL) and on a 10 mL cylinder (±0.1 mL). Which reading is better, Luz?

    • Both are equal, since both are cylinders and both read 4.0 mL
    • The 100 mL cylinder: ±0.5 mL is a bigger number, so it covers more of the 4.0 mL sample
    • The 10 mL cylinder: ±0.1 mL is 2.5% of 4.0 mL, against 12.5% for the larger one
  7. Hazard pictograms (OSHA Hazard Communication Standard)

    pictogramwarns of
    flameflammable liquids and gases
    corrosionskin burns and eye damage
    gas cylindergases under pressure
    exclamation markirritant, harmful if swallowed
    skull and crossbonesfatal or toxic if swallowed, breathed or touched
    flame over circleoxidizers, which help other materials burn
  8. Where should a bottle with the flame over circle pictogram be stored, Noah?

    • Away from the flammable-liquids cabinet, since oxidizers feed other fires
    • Next to the flammable-liquids cabinet, since both of these involve fire and heat
    • On any shelf, as long as the cap is tight
  9. Bottle P: Danger with skull and crossbones. Bottle Q: Warning with exclamation mark. What do the labels show, Pia?

    • Q is the more hazardous, because Warning means you must be warned
    • They are equally hazardous, since both labels name a hazard
    • P warns of a more severe hazard, since Danger marks the more severe level
  10. Ren pours leftover salt solution back into the stock bottle. Why is that a problem?

    • The stock bottle will overflow, because every leftover adds more liquid to a full bottle
    • The stock becomes more concentrated, because leftover solution is always stronger
    • The stock may now be contaminated, so every later user could get different results
  11. A bottle is labeled only Soln A. Which missing information matters most for safety, Tala?

    • Who poured it, so that person can be asked to come and clean up any spill that happens
    • What the substance is and its hazards, so nobody has to guess how to handle it
    • The date it was bought, since older bottles are weaker
  12. Parts of a Safety Data Sheet (OSHA, 16 sections in all)

    sectiontitle
    4First-aid measures
    6Accidental release measures
    7Handling and storage
    8Exposure controls and personal protection
    9Physical and chemical properties
    10Stability and reactivity
  13. A bottle of solution tips over on the bench. Which section tells how to clean it up safely, Zee?

    • Section 4, first-aid measures, since a spill could reach skin
    • Section 6, accidental release measures, which covers clean-up
    • Section 9, physical and chemical properties, since it says what the liquid is like
PencilGopencilgo.com

Lab tools, hazard symbols and Safety Data Sheets

Answer Key - Grade 10 Science Worksheet - Building Confidence

Circle the best answer, or write your answer on the line.

  1. Ari reads 5 mL on a cylinder whose readings are good to ±0.5 mL. What percent of the reading is that uncertainty?

    10 %
  2. Bo reads 8 mL on a cylinder whose readings are good to ±0.1 mL. What percent of the reading is that uncertainty?

    1.25 %
  3. Esme reads 25 mL on a cylinder whose readings are good to ±1 mL. What percent of the reading is that uncertainty?

    4 %
  4. Read this first

    Measuring tools (example set)

    toolholdssmallest mark
    10 mL cylinder10 mL0.2 mL
    100 mL cylinder100 mL1 mL
    250 mL cylinder250 mL2 mL
    250 mL beaker250 mL25 mL
  5. Jun needs 8.4 mL of water. Which tool gives the most precise reading?

    • The 250 mL beaker, since its wide opening makes pouring easy
    • The 10 mL cylinder, whose 0.2 mL marks are the finest that can hold 8.4 mL
    • The 100 mL cylinder, since it holds far more than 8.4 mL
  6. A 4.0 mL sample is read on a 100 mL cylinder (±0.5 mL) and on a 10 mL cylinder (±0.1 mL). Which reading is better, Luz?

    • Both are equal, since both are cylinders and both read 4.0 mL
    • The 100 mL cylinder: ±0.5 mL is a bigger number, so it covers more of the 4.0 mL sample
    • The 10 mL cylinder: ±0.1 mL is 2.5% of 4.0 mL, against 12.5% for the larger one
  7. Hazard pictograms (OSHA Hazard Communication Standard)

    pictogramwarns of
    flameflammable liquids and gases
    corrosionskin burns and eye damage
    gas cylindergases under pressure
    exclamation markirritant, harmful if swallowed
    skull and crossbonesfatal or toxic if swallowed, breathed or touched
    flame over circleoxidizers, which help other materials burn
  8. Where should a bottle with the flame over circle pictogram be stored, Noah?

    • Away from the flammable-liquids cabinet, since oxidizers feed other fires
    • Next to the flammable-liquids cabinet, since both of these involve fire and heat
    • On any shelf, as long as the cap is tight
  9. Bottle P: Danger with skull and crossbones. Bottle Q: Warning with exclamation mark. What do the labels show, Pia?

    • Q is the more hazardous, because Warning means you must be warned
    • They are equally hazardous, since both labels name a hazard
    • P warns of a more severe hazard, since Danger marks the more severe level
  10. Ren pours leftover salt solution back into the stock bottle. Why is that a problem?

    • The stock bottle will overflow, because every leftover adds more liquid to a full bottle
    • The stock becomes more concentrated, because leftover solution is always stronger
    • The stock may now be contaminated, so every later user could get different results
  11. A bottle is labeled only Soln A. Which missing information matters most for safety, Tala?

    • Who poured it, so that person can be asked to come and clean up any spill that happens
    • What the substance is and its hazards, so nobody has to guess how to handle it
    • The date it was bought, since older bottles are weaker
  12. Parts of a Safety Data Sheet (OSHA, 16 sections in all)

    sectiontitle
    4First-aid measures
    6Accidental release measures
    7Handling and storage
    8Exposure controls and personal protection
    9Physical and chemical properties
    10Stability and reactivity
  13. A bottle of solution tips over on the bench. Which section tells how to clean it up safely, Zee?

    • Section 4, first-aid measures, since a spill could reach skin
    • Section 6, accidental release measures, which covers clean-up
    • Section 9, physical and chemical properties, since it says what the liquid is like