Model a real object with a shape, and design problems with limits

Grade 10 Math Worksheet - Challenge Me

NameDate

Circle the best answer.

  1. Read this first

    Cans holding 1000 cm³ (example figures, made up for practice)

    radius (cm)height (cm)metal (cm²)
    335.4723.2
    419.9600.5
    512.7557.1
    5.410.9553.6
    68.8559.5
    76.5593.6
  2. Ari studies the cans on the card, each holding 1000 cm³. Which statement does the card support best?

    • Taller, narrower cans use less metal, so the r = 3 cm can is the one to choose.
    • The least metal in the table is at r = 5.4 cm, where the height is about the diameter.
    • The widest can, r = 7 cm, uses the least metal, because wider cans are shorter.
    • Metal falls steadily as the radius grows, so each wider can costs less to make.
  3. Bo makes open boxes by cutting squares from the corners of a 24 cm sheet. Which statement does the card support best?

    • Volume keeps rising as the cut grows, so the biggest cut shown, 6 cm, is the one to choose.
    • Of these cuts, 4 cm gives the most volume, 1024 cm³; the card cannot rule out cuts between them.
    • Volume falls as the cut grows larger, so the smallest cut shown, 1 cm, is the one to choose.
    • A 4 cm cut gives the most volume possible, because 1024 is the largest value on the card.
  4. Esme's 1:10 scale model of a statue has a mass of 2 kg and needs 50 mL of paint. What do the real statue's mass and paint need?

    • 2,000 kg and 5 L
    • 2,000 kg and 500 mL
    • 200 kg and 5 L
    • 20 kg and 500 mL
  5. A steel pipe has outer diameter 10 cm, wall thickness 0.5 cm and length 2 m. Steel has a density of 7.85 g/cm³. Using π = 3.14, about how heavy is Kira's pipe?

    • About 123.2 kg
    • About 0.23 kg
    • About 93.7 kg
    • About 23.4 kg
  6. Two cans of the same volume (example figures, made up for practice)

    canside area (cm²)end area (cm²)
    A251.2100.5
    B201.0157.0
  7. Luz compares the two cans on the card. Side metal costs $0.002 per cm² and end metal costs $0.004 per cm². Which can costs less, and by how much?

    • Can B, by about $0.09
    • Can A, by about $0.13
    • Can B, by about $0.13
    • Can A, by about $0.01
  8. A tree trunk is 10 m tall, 40 cm across at the base and 30 cm across at the top. Milo uses π = 3.14. Which statement about the trunk's volume is best supported?

    • It is between about 0.71 m³ and 1.26 m³; a tapered model gives about 0.97 m³.
    • It is about 0.71 m³, since the trunk is just 30 cm across at its narrowest point, the top.
    • It is about 1.26 m³, since the trunk is 40 cm across at its widest point, the base.
    • It is exactly 0.98 m³, the average of the two cylinder volumes at 30 cm and 40 cm.
  9. Pia's cylindrical tank has radius 1.2 m. A hose adds 15 L every minute. Using π = 3.14, about how fast does the water level rise?

    • About 0.083 cm per minute
    • About 0.00033 cm per minute
    • About 0.33 cm per minute
    • About 19.9 cm per minute
  10. A ball of radius r fits snugly inside Ren's cylinder, touching the sides, top and bottom. What fraction of the cylinder's volume does the ball fill?

    • 1/2
    • 3/2
    • 2/3
    • π/6, about 0.52
  11. Tala's cone tent cover (no floor) has base radius 2 m and slant height 3 m. Fabric costs $6 per m², plus 10% extra for waste. Using π = 3.14, what is the fabric cost?

    • About $124
    • About $113
    • About $249
    • About $207
  12. Zee says doubling every dimension of a box doubles both the cardboard needed and the volume. Which verdict is right?

    • No: the cardboard doubles but the volume becomes 8 times as much.
    • No: the cardboard becomes 8 times as much and the volume 4 times as much.
    • No: the cardboard becomes 4 times as much and the volume 8 times as much.
    • Yes: both double, since each length doubles.
PencilGopencilgo.com

Model a real object with a shape, and design problems with limits

Answer Key - Grade 10 Math Worksheet - Challenge Me

Circle the best answer.

  1. Read this first

    Cans holding 1000 cm³ (example figures, made up for practice)

    radius (cm)height (cm)metal (cm²)
    335.4723.2
    419.9600.5
    512.7557.1
    5.410.9553.6
    68.8559.5
    76.5593.6
  2. Ari studies the cans on the card, each holding 1000 cm³. Which statement does the card support best?

    • Taller, narrower cans use less metal, so the r = 3 cm can is the one to choose.
    • The least metal in the table is at r = 5.4 cm, where the height is about the diameter.
    • The widest can, r = 7 cm, uses the least metal, because wider cans are shorter.
    • Metal falls steadily as the radius grows, so each wider can costs less to make.
  3. Bo makes open boxes by cutting squares from the corners of a 24 cm sheet. Which statement does the card support best?

    • Volume keeps rising as the cut grows, so the biggest cut shown, 6 cm, is the one to choose.
    • Of these cuts, 4 cm gives the most volume, 1024 cm³; the card cannot rule out cuts between them.
    • Volume falls as the cut grows larger, so the smallest cut shown, 1 cm, is the one to choose.
    • A 4 cm cut gives the most volume possible, because 1024 is the largest value on the card.
  4. Esme's 1:10 scale model of a statue has a mass of 2 kg and needs 50 mL of paint. What do the real statue's mass and paint need?

    • 2,000 kg and 5 L
    • 2,000 kg and 500 mL
    • 200 kg and 5 L
    • 20 kg and 500 mL
  5. A steel pipe has outer diameter 10 cm, wall thickness 0.5 cm and length 2 m. Steel has a density of 7.85 g/cm³. Using π = 3.14, about how heavy is Kira's pipe?

    • About 123.2 kg
    • About 0.23 kg
    • About 93.7 kg
    • About 23.4 kg
  6. Two cans of the same volume (example figures, made up for practice)

    canside area (cm²)end area (cm²)
    A251.2100.5
    B201.0157.0
  7. Luz compares the two cans on the card. Side metal costs $0.002 per cm² and end metal costs $0.004 per cm². Which can costs less, and by how much?

    • Can B, by about $0.09
    • Can A, by about $0.13
    • Can B, by about $0.13
    • Can A, by about $0.01
  8. A tree trunk is 10 m tall, 40 cm across at the base and 30 cm across at the top. Milo uses π = 3.14. Which statement about the trunk's volume is best supported?

    • It is between about 0.71 m³ and 1.26 m³; a tapered model gives about 0.97 m³.
    • It is about 0.71 m³, since the trunk is just 30 cm across at its narrowest point, the top.
    • It is about 1.26 m³, since the trunk is 40 cm across at its widest point, the base.
    • It is exactly 0.98 m³, the average of the two cylinder volumes at 30 cm and 40 cm.
  9. Pia's cylindrical tank has radius 1.2 m. A hose adds 15 L every minute. Using π = 3.14, about how fast does the water level rise?

    • About 0.083 cm per minute
    • About 0.00033 cm per minute
    • About 0.33 cm per minute
    • About 19.9 cm per minute
  10. A ball of radius r fits snugly inside Ren's cylinder, touching the sides, top and bottom. What fraction of the cylinder's volume does the ball fill?

    • 1/2
    • 3/2
    • 2/3
    • π/6, about 0.52
  11. Tala's cone tent cover (no floor) has base radius 2 m and slant height 3 m. Fabric costs $6 per m², plus 10% extra for waste. Using π = 3.14, what is the fabric cost?

    • About $124
    • About $113
    • About $249
    • About $207
  12. Zee says doubling every dimension of a box doubles both the cardboard needed and the volume. Which verdict is right?

    • No: the cardboard doubles but the volume becomes 8 times as much.
    • No: the cardboard becomes 8 times as much and the volume 4 times as much.
    • No: the cardboard becomes 4 times as much and the volume 8 times as much.
    • Yes: both double, since each length doubles.