PencilGo

Grade 6 · Reading

6th grade Use text features to understand an article worksheet

6 printable versionsChallenge Me10 questions · answer keyFree · no account

Level: Building Confidence · On Level · Challenge Me

When it’s done, scan the sheet with your phone and PencilGo marks it and picks the next one. Create a free account

Version
Print

Use text features to understand an article

Grade 6 Reading Worksheet - Challenge Me

NameDate

Circle the best answer.

  1. Read this first

    The Dust Bowl

    How Farming Practices Turned Soil to Dust

    Plowing the Prairie
    [1] During the early 1900s, farmers on the Great Plains plowed millions of acres of native prairie grass to plant wheat. [2] The deep roots of that grass had held the soil in place through many dry years. [3] Wheat prices were high, so few farmers worried about what would happen if the rain stopped.

    Years Without Rain
    [4] In the 1930s a long **drought** struck the region, and the wheat withered in the fields. [5] With no roots to hold it and no crops to shade it, the dry **topsoil** blew away in great dust storms. [6] On April 14, 1935, a storm remembered as Black Sunday turned the afternoon sky dark across the southern plains.

    Cause | Effect
    [7] Plowing the prairie grass | Roots no longer held the soil
    [8] Drought in the 1930s | Wheat withered in the fields
    [9] Bare, dry topsoil | Soil blew away in dust storms
    [10] Conservation methods | Soil stayed in place and the land slowly recovered

    Picture: a farm in a dust storm
    Caption: [11] A farm family walks through blowing dust, and a fence is nearly buried by drifted soil.

    Healing the Land
    [12] The government urged farmers to try **conservation** methods, such as plowing along the curves of hills and planting rows of trees as windbreaks. [13] Rain returned in the late 1930s, and the land slowly recovered.

    A Closer Look
    [14] Contour plowing means plowing across a slope instead of up and down. [15] It makes small ridges that slow runoff and help keep soil from washing or blowing away.

  2. Ari wants one heading for the cause and effect table. Which heading fits all four rows?

    • How Drought Withered the Wheat
    • How Farming Turned the Great Plains Into a Desert
    • From Plowed Prairie to Dust Storms and Recovery
    • Black Sunday, April 14, 1935
  3. The caption describes a farm family walking through dust. What can the photograph show that sentence 5 cannot, Bo?

    • That plowing along the curves of hills keeps soil from blowing away in storms
    • What the storms felt like for families, such as soil drifting against a fence
    • That farm families had to leave the plains once the dust storms began to blow
    • That dust storms happened because the topsoil was dry and bare after the drought
  4. Which statement uses both the A Closer Look box and sentence 12, Esme?

    • The government urged farmers to plow along the curves of hills and plant windbreaks
    • Plowing across a slope instead of up and down makes small ridges that slow runoff
    • Contour plowing ended the drought by keeping rain on the land for the crops
    • Contour plowing is a conservation method because its ridges slow runoff and hold soil
  5. Use this

    How Bridges Handle Pushing and Pulling Forces

    Two Forces
    [1] Every bridge must carry its own weight and the weight of traffic, and engineers describe these loads with two forces. [2] **Compression** squeezes a material together, while **tension** pulls it apart. [3] A material that handles one force well may handle the other poorly, so engineers match each bridge design to the forces it will face.

    Bridge type | Main forces | Common materials
    [4] Beam | Compression on top, tension underneath | Steel, concrete
    [5] Arch | Mostly compression | Stone, concrete
    [6] Suspension | Tension in the cables, compression in the towers | Steel

    Matching Design to Place
    [7] Arch bridges push their load outward and down into solid ground at each end, so they need strong banks. [8] A suspension bridge hangs its roadway from steel cables that are anchored at both ends, which lets it cross very long gaps. [9] A beam bridge is the simplest kind, but long beams sag, so builders usually use beams for short spans.

    Picture: a suspension bridge
    Caption: [10] The Golden Gate Bridge in California is a suspension bridge with a main span of about 4,200 feet.

    Try It
    [11] Hold a sponge at both ends and bend it down in the middle. [12] The top squeezes together, and the bottom stretches.

  6. Jun wants to explain why a long beam sags. Which explanation uses the table and the Try It box together?

    • A beam has compression on top and tension underneath, and a bent sponge shows the top squeezing while the bottom stretches
    • The table says a beam has compression on top and tension underneath, and that steel and concrete are the common materials
    • The sponge test shows that steel beams are weaker than stone arches because arches mostly face compression
    • A bent sponge shows the top squeezing together while the bottom stretches, so the sponge is a good model
  7. What does the Golden Gate caption add that the table's suspension row does not, Kira?

    • That suspension bridges carry tension in their cables, as the table says
    • That the roadway hangs from steel cables anchored at both ends of the bridge
    • That suspension bridges are the strongest kind of bridge ever built
    • A real bridge with a measured span, showing how long a gap it can cross
  8. Why are compression and tension bold in sentence 2, and how does that help with the table, Luz?

    • They show the two forces are the most important words in the whole article, above the other words
    • They are the terms the table's Main forces column uses, so sentence 2 prepares readers
    • They show that the table simply repeats what sentence 2 already says about the forces
    • They are glossary entries that are defined for readers at the bottom of the page
  9. Use this

    The Four Layers of a Tropical Rainforest

    Stacked Habitats
    [1] A tropical rainforest is organized into four layers, and each layer receives a different amount of sunlight. [2] The tallest trees poke above the rest as the **emergent layer**, where wind and sun are strongest. [3] Beneath them, the leaves of most trees form the **canopy**, a dense roof that blocks much of the sunlight.

    Life in the Shade
    [4] Under the canopy, the **understory** is dim and still, and young trees wait there for a gap to open. [5] On the **forest floor**, only a tiny share of the sunlight arrives, so few plants grow there.

    Layer | Sunlight reaching it | Example animals
    [6] Emergent | Full sunlight | Harpy eagles
    [7] Canopy | Much of the light is absorbed here | Monkeys, toucans
    [8] Understory | Dim | Tree frogs, snakes
    [9] Forest floor | About 2 percent | Ants, beetles

    Picture: a toucan
    Caption: [10] A toucan perches in the canopy, where it feeds on fruit.

  10. Which claim does the table support best, Milo?

    • Animals in the lower layers are weaker than animals above because they get less light
    • The understory gets nearly as much sunlight as the emergent layer
    • Young trees wait in the understory for a gap in the canopy to open
    • The light shrinks toward the ground, and each layer lists different animals
  11. Which heading best fits the whole article, given that the table covers all four layers, Noah?

    • Four Layers, Four Different Habitats
    • Why the Forest Floor Stays Dark
    • How Light Decides Which Animals Survive
    • Toucans and Monkeys in the Trees
  12. If the table were removed, what would a reader lose, Pia?

    • The meaning of each bold term in the article
    • Facts already stated in sentences 1 to 5, so nothing new would be lost
    • A side-by-side view of light and animals for all four layers
    • The fact that the forest floor receives about 20 percent of the light
  13. Use this

    When the Moon Blocks the Sun

    Lining Up
    [1] A solar eclipse happens when the Moon passes directly between Earth and the Sun. [2] The Moon casts a shadow with two parts: a dark center called the **umbra** and a lighter outer region called the **penumbra**. [3] People standing in the umbra see the Sun completely covered, which is called a total eclipse.

    Why Eclipses Are Rare
    [4] The Moon's orbit is tilted compared with Earth's path around the Sun, so the three bodies usually do not line up exactly. [5] Even when they do, the umbra is narrow, usually less than about 170 miles wide where it reaches the ground. [6] As a result, a total eclipse is visible from any one spot on Earth only about once in several centuries.

    Type of eclipse | What you see | Where you stand
    [7] Total | The Sun fully covered | In the umbra
    [8] Partial | Part of the Sun covered | In the penumbra
    [9] Annular | A bright ring around the dark Moon | Where the Moon is too far away to cover the Sun fully

    Picture: the Sun's corona
    Caption: [10] During the few minutes of totality, the Sun's faint outer atmosphere, called the corona, becomes visible.

    Safety First
    [11] Never look at the Sun without eclipse glasses, even when most of it is covered. [12] Only during totality, when the Sun is fully covered, is it safe to take the glasses off.

  14. Which heading best fits sentences 4 to 6, Zee?

    • Why Hardly Anyone Ever Gets to See a Total Eclipse
    • Everything to Know About Eclipses and the Moon
    • How the Moon's Shadow Is Shaped Into Two Parts
    • Why a Total Eclipse Is Rare at Any One Place
PencilGopencilgo.com

6th grade Use text features to understand an article worksheet – printable
Print: 123456

About this worksheet

Use text features to understand an article. Every version has 10 questions, and the answer key prints on the second page.

What your child will learn

  • I can use a heading to find the part of an article I need, and tell when a heading is too narrow, too broad or from another section.
  • I can say what a caption, a bold word, a box, a table or a glossary adds that the paragraphs do not.
  • I can use two features together, such as a table and a paragraph or a sidebar and a sentence, to answer a question that neither answers alone.
  • I can tell when an answer claims more than a feature shows.

Words to know

text feature: A part of the page that helps a reader find or understand information

heading: A short title on its own line that tells what one section covers

caption: A line under a picture that tells what the picture shows or adds

bold word: A word in darker type that marks a key term

sidebar: A small box, such as "Did You Know?", with an extra fact or a how-to

table: Facts set in rows and columns so they can be compared

glossary: A short list that tells what words mean

Common mistakes

When using an article's headings and features, your child chose a heading, title or question that belongs to another section, or is too broad or too narrow. Ask what the whole section is about.

When using an article's headings, captions and other features, your child gave one feature the job of another, such as a caption doing a sidebar's work. Ask what each feature on the page is for.

When using an article's features, your child chose a true detail instead of what the feature does for the reader. Ask what job the feature has on the page.

Questions parents ask

What is the most common mistake with use text features to understand an article?

When using an article's headings and features, your child chose a heading, title or question that belongs to another section, or is too broad or too narrow. Ask what the whole section is about.

Are these 6th grade reading worksheets free to print?

Yes. All 6 printable versions at each level are free to print, with the answer key, and no account is needed.

More grade 6 reading

See all grade 6 reading

Every sheet you scan goes into your child’s record: dated, marked and ready for the year-end portfolio. Homeschool records