PencilGo

Grade 11 · Science · Physics

11th grade Compare designs that reduce the force in a collision worksheet

6 printable versionsOn Level10 questions · answer keyFree · no account

Level: Building Confidence · On Level · Challenge Me

When it’s done, scan the sheet with your phone and PencilGo marks it and picks the next one. Create a free account

Version
Print

Compare designs that reduce the force in a collision

Grade 11 Science Worksheet

NameDate

Circle the best answer, or write your answer on the line.

  1. A 2 kg toy cart at 3 m/s must be stopped with an average force of no more than 15 N. How long must the stop last, Ari?

  2. A 4 kg toy cart at 2 m/s must be stopped with an average force of no more than 10 N. How long must the stop last, Bo?

  3. A 0.5 kg toy cart at 6 m/s must be stopped with an average force of no more than 5 N. How long must the stop last, Esme?

  4. In the bar chart, how do the two stops' changes in momentum compare, Jun?

    • The soft stop's is bigger
    • The hard stop's change is bigger
    • Neither changes momentum
    • They are the same, 6 kg·m/s
  5. In the bar chart, what are the average forces for the hard and soft stops, Kira?

    Use the picture in question 4.

    • Hard 0.3 N, soft 1.5 N
    • Hard 120 N, soft 24 N
    • Both 6 N
    • Hard 24 N, soft 120 N
  6. In the bar chart, how many times smaller is the soft stop's force, Luz?

    Use the picture in question 4.

    • The same
    • 5 times bigger
    • 5 times smaller
    • 0.2 times smaller
  7. Using the bumper table, with force under 50 N and added mass at most 100 g, why isn't D chosen, Milo?

    • It adds 150 g, over the limit
    • Its force is too high
    • It stops the cart too slowly to count
    • It bounces the cart back
  8. Using the bumper table, a classmate picks C because it is lightest. Why does C fail, Noah?

    Use the picture in question 7.

    • It is the right pick, being lightest
    • It is too heavy
    • Its 300 N force breaks the force limit
    • It bounces the cart back
  9. Using the bumper table, a classmate picks D because its force is lowest. What should Pia point out?

    Use the picture in question 7.

    • D bounces the cart back
    • D's force is too high
    • D wins on force, so pick it
    • D breaks the 100 g mass limit
  10. A very thin, soft foam bumper squashes completely flat in a test. What problem does that cause, Zee?

    • The cart bounces back faster
    • The force drops to zero
    • Nothing; flat foam works well
    • The cart stops suddenly at the end, with a big force
PencilGopencilgo.com

11th grade Compare designs that reduce the force in a collision worksheet – printable
Print: 123456

About this worksheet

Compare designs that reduce the force in a collision. Every version has 10 questions, and the answer key prints on the second page.

What your child will learn

  • I can find the average stopping force, F = Δp ÷ Δt, and the stopping time a force limit requires.
  • I can compare bumpers. A longer stop means a smaller force, and a bounce raises Δp, so it is not gentler. The force ratio is soft time ÷ hard time.
  • I can use a criteria table. I can tell criteria (goals) from constraints (limits) and choose a design that meets every constraint.
  • I can check test data against the physics, plan fair repeated tests, spot failure modes (foam that bottoms out) and suggest improvements.

Standard: HS-PS2-3, HS-ETS1-3

Words to know

criterion: A goal a good design should meet as well as possible

constraint: A limit a design must not break, like a mass limit

average force: Δp ÷ Δt over the stop

bottoming out: A soft bumper squashing completely flat, ending in a sudden stop

fair test: A test where only the design changes

Common mistakes

Your child multiplied by the time. Average force = change in momentum ÷ stopping time.

Your child divided force by momentum. Stopping time = change in momentum ÷ the force allowed.

Your child put the times the wrong way up. The hard bumper's force is bigger, by soft time ÷ hard time.

Questions parents ask

What is the most common mistake with compare designs that reduce the force in a collision?

Your child multiplied by the time. Average force = change in momentum ÷ stopping time.

Are these 11th grade science worksheets free to print?

Yes. All 6 printable versions at each level are free to print, with the answer key, and no account is needed.

More physics

See all Physics

Every sheet you scan goes into your child’s record: dated, marked and ready for the year-end portfolio. Homeschool records